Super Transports Private Limited
Trichy Road, Coimbatore, Tamil Nadu
GST No. 33AAACS4960Q1ZX
TrustSEAL Verified
Call 0804763891592% Response Rate
SEND EMAIL
Product Details:
| Brand | Mobil |
| Features | Base Oil |
| Operating Temperature Gear | -20 to +45, Deg C, OGL, except hoist |
| Timken OK Load | 25 kg |
| Weld | 800 |
| LWI | 145 |
| Min Dispensing Temp | -20 Deg C |
| Worked Penetration | 380 mm/10 @ 25 Deg C |
| Dropping Point | 193 Deg C |
| Flash Point | 243 |
| Rust Protection | Pass |
| Copper Strip Corrosion | 1, 24 hours @100 Deg C |
| CST | 2000, 120, @ 40 DegC, @ 100 DegC |
| Molybdenum Disulfide | 2.0 Wt. %, |
The Mobil Dynagear Series of premium performance open gear lubricants is designed to provide outstanding protection of heavily loaded open gear sets exposed to a wide range of operating conditions. The Mobil Dynagear Series is based on lithium thickener technology, carefully chosen high performance additives and high viscosity semi-synthetic base fluids. These components synergistically provide a lubricant film that firmly adheres to lubricated surfaces. All members of the Mobil Dynagear Series are formulated solvent free and provide excellent dispensability without the use of chlorinated or hydrocarbon solvents.
The Mobil Dynagear Series’ solvent free technology can help to significantly reduce run-off that can occur during lubricant application. Reduced run-off can help to establish a cohesive lubricating film quickly and enable optimization of the lubricant dispensing systems. A properly set-up dispensing system helps produce less waste while delivering the optimum lubricant film required to protect the gear set. The Mobil Dynagear Series can help reduce handling and waste disposal costs and the impact of fugitive emissions on the environment associated with the use of hydrocarbon solvents.
The Mobil Dynagear Series does not contain carbon black or asphalt. Additionally, the Mobil Dynagear Series does not form hardened tar like materials in the gear tooth root, does not flake off at low temperatures, can help keep spray injectors from plugging and has excellent low temperature pumpability. The Mobil Dynagear Series premium performance technology enables simpler and potentially less expensive clean-up of the gear teeth and guard, helping to reduce the amount of maintenance and inspection work necessary on critical open gear systems.
Mobil Dynagear 800 Extra, 600 SL, 2000, and 4000 are leading members of the Mobil Industrial Lubricants offered greases. The Mobil Dynagear Series of products have been specifically designed by ExxonMobil formulation technologists and are backed by our worldwide technical support staff.
The Mobil Dynagear Series was specifically formulated to meet the needs of heavily loaded gearsets commonly found in the mining industry that require exceptional EP /Anti-Wear performance and which would remain in place even in tough conditions of water spray, dust and dirt, and high and low temperatures. These greases offer the following features, advantages, and potential benefits:
| Features | Advantages and Potential Benefits |
| Solvent free formulation | Higher lubricant flash points can help improve safety performance and reduce waste and associated disposal costs |
| Asphalt free formulation | Helps maintain system cleanliness, clean spray nozzles, prevents root build up and prevent flaking. |
| Carbon Black Free formulation | Carbon black is not used in the formulation and thereby does not contribute to potential health effects related to exposure to carbon black. |
| Excellent water resistance | “Stay in Place” performance and the ability to absorb moderate amounts of water with little change to the lubricant film |
| Excellent anti-rust, corrosion control | Long life for protected parts helps reduce maintenance associated with damaged surfaces |
| Very good low temperature pumpability and mobility for use in centralized systems | Provides excellent low temperature pumpability and start-up performance, a key feature for remote applications. |
| Powerful EP (extreme pressure) protection enhanced with solid lubricants | Helps protect mating surfaces against damaging wear in contact zones, helping to extended component life and reduce unplanned maintenance and repairs |
Product Details:
| Brand | Mobil |
| Features | Base Oil |
| Operating Temperature Grease | -37 to +50, Deg C, Multi-purpose |
| Operating Temperature Gear | -37 to +10, Deg C, OGL, except hoist |
| Min Dispensing Temperature | -40 Deg C |
| Worked Penetration | 335 mm/10 @ 25 Deg C |
| Dropping Pt | 198 Deg C |
| Flash Point and Base Fluids | 204 |
| Rust Protection | Pass |
The Mobil Dynagear Series of premium performance open gear lubricants is designed to provide outstanding protection of heavily loaded open gear sets exposed to a wide range of operating conditions. The Mobil Dynagear Series is based on lithium thickener technology, carefully chosen high performance additives and high viscosity semi-synthetic base fluids. These components synergistically provide a lubricant film that firmly adheres to lubricated surfaces. All members of the Mobil Dynagear Series are formulated solvent free and provide excellent dispensability without the use of chlorinated or hydrocarbon solvents.
The Mobil Dynagear Series’ solvent free technology can help to significantly reduce run-off that can occur during lubricant application. Reduced run-off can help to establish a cohesive lubricating film quickly and enable optimization of the lubricant dispensing systems. A properly set-up dispensing system helps produce less waste while delivering the optimum lubricant film required to protect the gear set. The Mobil Dynagear Series can help reduce handling and waste disposal costs and the impact of fugitive emissions on the environment associated with the use of hydrocarbon solvents.
The Mobil Dynagear Series does not contain carbon black or asphalt. Additionally, the Mobil Dynagear Series does not form hardened tar like materials in the gear tooth root, does not flake off at low temperatures, can help keep spray injectors from plugging and has excellent low temperature pumpability. The Mobil Dynagear Series premium performance technology enables simpler and potentially less expensive clean-up of the gear teeth and guard, helping to reduce the amount of maintenance and inspection work necessary on critical open gear systems.
Mobil Dynagear 800 Extra, 600 SL, 2000, and 4000 are leading members of the Mobil Industrial Lubricants offered greases. The Mobil Dynagear Series of products have been specifically designed by ExxonMobil formulation technologists and are backed by our worldwide technical support staff.
The Mobil Dynagear Series was specifically formulated to meet the needs of heavily loaded gearsets commonly found in the mining industry that require exceptional EP /Anti-Wear performance and which would remain in place even in tough conditions of water spray, dust and dirt, and high and low temperatures. These greases offer the following features, advantages, and potential benefits:
| Features | Advantages and Potential Benefits |
| Solvent free formulation | Higher lubricant flash points can help improve safety performance and reduce waste and associated disposal costs |
| Asphalt free formulation | Helps maintain system cleanliness, clean spray nozzles, prevents root build up and prevent flaking. |
| Carbon Black Free formulation | Carbon black is not used in the formulation and thereby does not contribute to potential health effects related to exposure to carbon black. |
| Excellent water resistance | “Stay in Place” performance and the ability to absorb moderate amounts of water with little change to the lubricant film |
| Excellent anti-rust, corrosion control | Long life for protected parts helps reduce maintenance associated with damaged surfaces |
| Very good low temperature pumpability and mobility for use in centralized systems | Provides excellent low temperature pumpability and start-up performance, a key feature for remote applications. |
| Powerful EP (extreme pressure) protection enhanced with solid lubricants | Helps protect mating surfaces against damaging wear in contact zones, helping to extended component life and reduce unplanned maintenance and repairs |
Product Details:
| Brand | Mobil |
| Color | Red |
| Operating Temperature Grease | -40 to +40, Deg C, Multi-purpose |
| Operating Temperature Gear | -40 to +10, Deg C, OGL, except hoist |
| Min Dispensing Temperature | -45 Deg C |
| Worked Penetration | 400 mm/10 @ 25 Deg C |
| Dropping Pt | 175 Deg C |
| Flash Point and Base Fluids | 158 |
| Rust Protection | Pass |
The Mobil Dynagear Series of premium performance open gear lubricants is designed to provide outstanding protection of heavily loaded open gear sets exposed to a wide range of operating conditions. The Mobil Dynagear Series is based on lithium thickener technology, carefully chosen high performance additives and high viscosity semi-synthetic base fluids. These components synergistically provide a lubricant film that firmly adheres to lubricated surfaces. All members of the Mobil Dynagear Series are formulated solvent free and provide excellent dispensability without the use of chlorinated or hydrocarbon solvents.
The Mobil Dynagear Series’ solvent free technology can help to significantly reduce run-off that can occur during lubricant application. Reduced run-off can help to establish a cohesive lubricating film quickly and enable optimization of the lubricant dispensing systems. A properly set-up dispensing system helps produce less waste while delivering the optimum lubricant film required to protect the gear set. The Mobil Dynagear Series can help reduce handling and waste disposal costs and the impact of fugitive emissions on the environment associated with the use of hydrocarbon solvents.
The Mobil Dynagear Series does not contain carbon black or asphalt. Additionally, the Mobil Dynagear Series does not form hardened tar like materials in the gear tooth root, does not flake off at low temperatures, can help keep spray injectors from plugging and has excellent low temperature pumpability. The Mobil Dynagear Series premium performance technology enables simpler and potentially less expensive clean-up of the gear teeth and guard, helping to reduce the amount of maintenance and inspection work necessary on critical open gear systems.
Mobil Dynagear 800 Extra, 600 SL, 2000, and 4000 are leading members of the Mobil Industrial Lubricants offered greases. The Mobil Dynagear Series of products have been specifically designed by ExxonMobil formulation technologists and are backed by our worldwide technical support staff.
The Mobil Dynagear Series was specifically formulated to meet the needs of heavily loaded gearsets commonly found in the mining industry that require exceptional EP /Anti-Wear performance and which would remain in place even in tough conditions of water spray, dust and dirt, and high and low temperatures. These greases offer the following features, advantages, and potential benefits:
| Features | Advantages and Potential Benefits |
| Solvent free formulation | Higher lubricant flash points can help improve safety performance and reduce waste and associated disposal costs |
| Asphalt free formulation | Helps maintain system cleanliness, clean spray nozzles, prevents root build up and prevent flaking. |
| Carbon Black Free formulation | Carbon black is not used in the formulation and thereby does not contribute to potential health effects related to exposure to carbon black. |
| Excellent water resistance | “Stay in Place” performance and the ability to absorb moderate amounts of water with little change to the lubricant film |
| Excellent anti-rust, corrosion control | Long life for protected parts helps reduce maintenance associated with damaged surfaces |
| Very good low temperature pumpability and mobility for use in centralized systems | Provides excellent low temperature pumpability and start-up performance, a key feature for remote applications. |
| Powerful EP (extreme pressure) protection enhanced with solid lubricants | Helps protect mating surfaces against damaging wear in contact zones, helping to extended component life and reduce unplanned maintenance and repairs |
Product Details:
| Packaging Type | Drum |
| Operating Temperature Gear | -10 to 55, Deg C, OGL, except hoist |
| Molybdenum Disulfide | 2.0 Wt. %, |
| Timken OK Load | 25 kg |
| Weld | 800 |
| LWI | 145 |
| Timken Retention | Pass, (30 lbs./30 min.) |
| Operating Temperature | -10 to 35 Deg C, Hoist Drum Gear |
| Min Dispensing Temperature | -10 Deg C |
| Worked Penetration | 390 mm/10 @ 25 Deg C |
| Dropping Pt | 177 Deg C |
| Flash Point | 268 |
| Rust Protection | Pass |
| Copper Strip Corrosion | 1 24 hours @100 Deg C |
| CST | 4000, @ 40 Deg C |
The Mobil Dynagear Series of premium performance open gear lubricants is designed to provide outstanding protection of heavily loaded open gear sets exposed to a wide range of operating conditions. The Mobil Dynagear Series is based on lithium thickener technology, carefully chosen high performance additives and high viscosity semi-synthetic base fluids. These components synergistically provide a lubricant film that firmly adheres to lubricated surfaces. All members of the Mobil Dynagear Series are formulated solvent free and provide excellent dispensability without the use of chlorinated or hydrocarbon solvents.
The Mobil Dynagear Series’ solvent free technology can help to significantly reduce run-off that can occur during lubricant application. Reduced run-off can help to establish a cohesive lubricating film quickly and enable optimization of the lubricant dispensing systems. A properly set-up dispensing system helps produce less waste while delivering the optimum lubricant film required to protect the gear set. The Mobil Dynagear Series can help reduce handling and waste disposal costs and the impact of fugitive emissions on the environment associated with the use of hydrocarbon solvents.
The Mobil Dynagear Series does not contain carbon black or asphalt. Additionally, the Mobil Dynagear Series does not form hardened tar like materials in the gear tooth root, does not flake off at low temperatures, can help keep spray injectors from plugging and has excellent low temperature pumpability. The Mobil Dynagear Series premium performance technology enables simpler and potentially less expensive clean-up of the gear teeth and guard, helping to reduce the amount of maintenance and inspection work necessary on critical open gear systems.
Mobil Dynagear 800 Extra, 600 SL, 2000, and 4000 are leading members of the Mobil Industrial Lubricants offered greases. The Mobil Dynagear Series of products have been specifically designed by ExxonMobil formulation technologists and are backed by our worldwide technical support staff.
The Mobil Dynagear Series was specifically formulated to meet the needs of heavily loaded gearsets commonly found in the mining industry that require exceptional EP /Anti-Wear performance and which would remain in place even in tough conditions of water spray, dust and dirt, and high and low temperatures. These greases offer the following features, advantages, and potential benefits:
| Features | Advantages and Potential Benefits |
| Solvent free formulation | Higher lubricant flash points can help improve safety performance and reduce waste and associated disposal costs |
| Asphalt free formulation | Helps maintain system cleanliness, clean spray nozzles, prevents root build up and prevent flaking. |
| Carbon Black Free formulation | Carbon black is not used in the formulation and thereby does not contribute to potential health effects related to exposure to carbon black. |
| Excellent water resistance | “Stay in Place” performance and the ability to absorb moderate amounts of water with little change to the lubricant film |
| Excellent anti-rust, corrosion control | Long life for protected parts helps reduce maintenance associated with damaged surfaces |
| Very good low temperature pumpability and mobility for use in centralized systems | Provides excellent low temperature pumpability and start-up performance, a key feature for remote applications. |
| Powerful EP (extreme pressure) protection enhanced with solid lubricants | Helps protect mating surfaces against damaging wear in contact zones, helping to extended component life and reduce unplanned maintenance and repairs |