Product Details:
Brand | Mobil |
ISO VG Grade | 680 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, STM D 665 distilled water |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+ |
Viscosity | ASTM D 445 |
CST | 680.0, @ 40 DegC, @ 100 DegC |
Viscosity Index | 265, ASTM D 2270 |
Density | 1.076, 15 DegC ASTM D4052 |
Pour Point | -33, ASTM D 97, DegC |
Flash Point | 265, ASTM D 92 DegC |
Product Details:
Brand | Mobil |
ISO VG Grade | 68 |
FZG Scuffing Test ISO Fail Load Stage | 10 |
Viscosity | ASTM D 445 |
CST | 68.0, @ 40 DegC, @ 100 DegC |
Viscosity Index | 170, ASTM D 2270 |
Density | 1.079, 15 DegC ASTM D4052 |
Pour Point | ASTM D 92, 265, DegC, ASTM D 97, -30 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, STM D 665 distilled water |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
Mobil Glygoyle™ Series lubricants are superior performance gear, bearing and compressor oils designed to provide outstanding benefits in terms of efficiency, long oil life, and equipment protection. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed for use under operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low-temperature fluidity. The ISO 150 to 1000 grades are NSF H1 registered lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact.
Exceptional EP/antiwear protection for critical equipment components
The Mobil Glygoyle Series of fully synthetic oils is specifically designed to outperform mineral and PAO synthetic lubricants in gear and hydrocarbon gas compression applications. In worm gears, the unique properties of these oils allows for more torque to be put through the reducer while in many cases lowering the operating oil sump temperature correlating to longer seal, oil, and gearbox life. In gas compressors, the limited solubility of hydrocarbons in the Mobil Glygoyle Series allows for reduced lubricant dilution and enhanced equipment protection.
Features compared to other mineral, synthetic, and PAG lubricants:
General: There are various types of PAG base oils. The inherent properties of these oils can differ depending on the raw materials and processes used in their manufacture. Features that can differ among various PAG oils include their traction coefficient (energy efficiency), thermal conductivity, and solubility with hydrocarbon oils, tendency to attract water, and low temperature properties.
High Efficiency: ExxonMobil researchers have selected PAG base oils which provide high levels of energy efficiency relative to mineral, PAOs, and other PAG oils. This, coupled with an increased thermal conductivity of about 10% over mineral and PAO oils, leads to lower operating temperatures and longer component life.
Wide Temperatures: The Mobil Glygoyle Series has very high VIs ranging from 170 for the ISO 68 to 285 for the ISO 1000. This leads to a wide operating temperature range, beyond that of mineral and PAO lubricants.
Rust Protection: PAG lubricants, which are designed to be immiscible with hydrocarbon oils, tend to absorb water more than mineral or PAO oils. Because of the potential for high water-in-oil levels, care must be taken to prevent the formation of rust on equipment. Mobil Glygoyle Series oils pass major rust tests such as the ASTM D665A and Bethlehem Steel rust test parts A/B, and receives 0,0 ratings in the DIN 51802 Emcor rust test with distilled water. In addition, they show good yellow metal compatibility with a 1B rating in the ASTM D130 test. Mobil Glygoyle Series is not recommended for use in areas where saltwater contamination is expected.
Foam Control: Foam control is important, especially in boxes that are "Sealed for Life". Mobil Glygoyle Series provides excellent results in all three sequences of ASTM D 892 Foam Test.
Product Details:
Brand | Mobil |
ISO VG Grade | 460 |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+ |
Viscosity | ASTM D 445 |
CST | 460.0, 77.2 @ 40 DegC, @ 100 DegC |
Viscosity Index | 250, ASTM D 2270 |
Density | 1.076, 15 DegC ASTM D4052 |
Pour Point | -33, ASTM D 97, DegC |
Flash Point | 265, ASTM D 92 DegC |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, STM D 665 distilled water |
Product Details:
Brand | Mobil |
ISO VG grade | 320 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, STM D 665 distilled water |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+ |
Viscosity | ASTM D 445 |
CST | 320.0, 55.2 @ 40 DegC, @ 100 DegC |
Viscosity Index | 240, ASTM D 2270 |
Density | 1.077, 15 DegC ASTM D4052 |
Pour Point | -33, ASTM D 97, DegC |
Flash Point | 265, ASTM D 92 DegC |
Product Details:
Brand | Mobil |
ISO VG Grade | 220 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, STM D 665 distilled water |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+ |
Viscosity | ASTM D 445 |
CST | 220.0, 38.1 @ 40 DegC, @ 100 DegC |
Viscosity Index | 225, ASTM D 2270 |
Density | 1.077, 15 DegC ASTM D4052 |
Pour Point | -30, 265, ASTM D 97 |
Flash Point | 265, ASTM D 92 DegC |
Mobil Glygoyle™ Series lubricants are superior performance gear, bearing and compressor oils designed to provide outstanding benefits in terms of efficiency, long oil life, and equipment protection. These fully synthetic, polyethylene glycol (PAG) lubricants were developed for use under operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low-temperature fluidity. The ISO 150 to 1000 grades are NSF H1 registered lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact.
Features and Benefits:
The Mobil Glygoyle Series of fully synthetic oils is specifically designed to outperform mineral and PAO synthetic lubricants in gear and hydrocarbon gas compression applications. In worm gears, the unique properties of these oils allows for more torque to be put through the reducer while in many cases lowering the operating oil sump temperature correlating to longer seal, oil, and gearbox life. In gas compressors, the limited solubility of hydrocarbons in the Mobil Glygoyle Series allows for reduced lubricant dilution and enhanced equipment protection.
Features compared to other mineral, synthetic, and PAG lubricants:
General: There are various types of PAG base oils. The inherent properties of these oils can differ depending on the raw materials and processes used in their manufacture. Features that can differ among various PAG oils include their traction coefficient (energy efficiency), thermal conductivity, and solubility with hydrocarbon oils, tendency to attract water, and low-temperature properties.
High Efficiency: ExxonMobil researchers have selected PAG base oils which provide high levels of energy efficiency relative to mineral, PAOs, and other PAG oils. This, coupled with an increased thermal conductivity of about 10% over mineral and PAO oils, leads to lower operating temperatures and longer component life.
Wide Temperatures: The Mobil Glygoyle Series has very high VIs ranging from 170 for the ISO 68 to 285 for the ISO 1000. This leads to a wide operating temperature range, beyond that of mineral and PAO lubricants.
Rust Protection: PAG lubricants, which are designed to be immiscible with hydrocarbon oils, tend to absorb water more than mineral or PAO oils. Because of the potential for high water-in-oil levels, care must be taken to prevent the formation of rust on equipment. Mobil Glygoyle Series oils pass major rust tests such as the ASTM D665A and Bethlehem Steel rust test parts A/B, and receives 0,0 ratings in the DIN 51802 Emcor rust test with distilled water. In addition, they show good yellow metal compatibility with a 1B rating in the ASTM D130 test. Mobil Glygoyle Series is not recommended for use in areas where saltwater contamination is expected.
Foam-Control: Foam control is important, especially in boxes that are "Sealed for Life". Mobil Glygoyle Series provides excellent results in all three sequences of ASTM D 892 Foam Test.
Product Details:
Brand | Mobil |
ISO VG Grade | 150 |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+ |
Viscosity | ASTM D 445 |
CST | 150.0, @ 40 DegC, @ 100 DegC |
Viscosity Index | 210, ASTM D 2270 |
Density | 1.078, 15 DegC ASTM D4052 |
Pour Point | -30, ASTM D 97, DegC |
Flash Point | 265, ASTM D 92 DegC |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, STM D 665 distilled water |
Mobil Glygoyle™ Series lubricants are superior performance gear, bearing and compressor oils designed to provide outstanding benefits in terms of efficiency, long oil life, and equipment protection. These fully synthetic, polyethylene glycol (PAG) lubricants were developed for use under operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low-temperature fluidity. The ISO 150 to 1000 grades are NSF H1 registered lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact.
Features and Benefits:
The Mobil Glygoyle Series of fully synthetic oils is specifically designed to outperform mineral and PAO synthetic lubricants in gear and hydrocarbon gas compression applications. In worm gears, the unique properties of these oils allows for more torque to be put through the reducer while in many cases lowering the operating oil sump temperature correlating to longer seal, oil, and gearbox life. In gas compressors, the limited solubility of hydrocarbons in the Mobil Glygoyle Series allows for reduced lubricant dilution and enhanced equipment protection.
Features compared to other mineral, synthetic, and PAG lubricants:
General: There are various types of PAG base oils. The inherent properties of these oils can differ depending on the raw materials and processes used in their manufacture. Features that can differ among various PAG oils include their traction coefficient (energy efficiency), thermal conductivity, and solubility with hydrocarbon oils, tendency to attract water, and low-temperature properties.
High Efficiency: ExxonMobil researchers have selected PAG base oils which provide high levels of energy efficiency relative to mineral, PAOs, and other PAG oils. This, coupled with an increased thermal conductivity of about 10% over mineral and PAO oils, leads to lower operating temperatures and longer component life.
Wide Temperatures: The Mobil Glygoyle Series has very high VIs ranging from 170 for the ISO 68 to 285 for the ISO 1000. This leads to a wide operating temperature range, beyond that of mineral and PAO lubricants.
Rust Protection: PAG lubricants, which are designed to be immiscible with hydrocarbon oils, tend to absorb water more than mineral or PAO oils. Because of the potential for high water-in-oil levels, care must be taken to prevent the formation of rust on equipment. Mobil Glygoyle Series oils pass major rust tests such as the ASTM D665A and Bethlehem Steel rust test parts A/B, and receives 0,0 ratings in the DIN 51802 Emcor rust test with distilled water. In addition, they show good yellow metal compatibility with a 1B rating in the ASTM D130 test. Mobil Glygoyle Series is not recommended for use in areas where saltwater contamination is expected.
Foam-Control: Foam control is important, especially in boxes that are "Sealed for Life". Mobil Glygoyle Series provides excellent results in all three sequences of ASTM D 892 Foam Test.
Product Details:
Rust Protection | Pass, ASTM D 665 distilled waterc |
Brand | Mobil |
ISO VG Grade | 1000 |
Viscosity | ASTM D 445 |
CST | 1000.0, @ 40 DegC, @ 100 DegC |
Viscosity Index | 285, ASTM D 2270 |
Density | 1.076, 15 DegC ASTM D4052 |
Pour Point | DegC, ASTM D 92, -30, 260, ASTM D 97 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+, |
Mobil Glygoyle™ Series lubricants are superior performance gear, bearing and compressor oils designed to provide outstanding benefits in terms of efficiency, long oil life, and equipment protection. These fully synthetic, polyethylene glycol (PAG) lubricants were developed for use under operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low-temperature fluidity. The ISO 150 to 1000 grades are NSF H1 registered lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact.
Features and Benefits:
The Mobil Glygoyle Series of fully synthetic oils is specifically designed to outperform mineral and PAO synthetic lubricants in gear and hydrocarbon gas compression applications. In worm gears, the unique properties of these oils allows for more torque to be put through the reducer while in many cases lowering the operating oil sump temperature correlating to longer seal, oil, and gearbox life. In gas compressors, the limited solubility of hydrocarbons in the Mobil Glygoyle Series allows for reduced lubricant dilution and enhanced equipment protection.
Features compared to other mineral, synthetic, and PAG lubricants:
General: There are various types of PAG base oils. The inherent properties of these oils can differ depending on the raw materials and processes used in their manufacture. Features that can differ among various PAG oils include their traction coefficient (energy efficiency), thermal conductivity, and solubility with hydrocarbon oils, tendency to attract water, and low-temperature properties.
High Efficiency: ExxonMobil researchers have selected PAG base oils which provide high levels of energy efficiency relative to mineral, PAOs, and other PAG oils. This, coupled with an increased thermal conductivity of about 10% over mineral and PAO oils, leads to lower operating temperatures and longer component life.
Wide Temperatures: The Mobil Glygoyle Series has very high VIs ranging from 170 for the ISO 68 to 285 for the ISO 1000. This leads to a wide operating temperature range, beyond that of mineral and PAO lubricants.
Rust Protection: PAG lubricants, which are designed to be immiscible with hydrocarbon oils, tend to absorb water more than mineral or PAO oils. Because of the potential for high water-in-oil levels, care must be taken to prevent the formation of rust on equipment. Mobil Glygoyle Series oils pass major rust tests such as the ASTM D665A and Bethlehem Steel rust test parts A/B, and receives 0,0 ratings in the DIN 51802 Emcor rust test with distilled water. In addition, they show good yellow metal compatibility with a 1B rating in the ASTM D130 test. Mobil Glygoyle Series is not recommended for use in areas where saltwater contamination is expected.
Foam-Control: Foam control is important, especially in boxes that are "Sealed for Life". Mobil Glygoyle Series provides excellent results in all three sequences of ASTM D 892 Foam Test.
Product Details:
Rust Protection | Pass |
Brand | Mobil |
ISO VG Grade | 100 |
Viscosity | ASTM D 445 |
CST | 100.0, @ 40 DegC, @ 100 DegC |
Viscosity Index | 190, ASTM D 2270 |
Density | 1.079, 15 DegC ASTM D4052 |
Pour Point | 265, ASTM D 92, DegC, -30, ASTM D 97 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test ISO Fail Load Stage | 12+, |
Mobil Glygoyle™ Series lubricants are superior performance gear, bearing and compressor oils designed to provide outstanding benefits in terms of efficiency, long oil life, and equipment protection. These fully synthetic, polyethylene glycol (PAG) lubricants were developed for use under operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low-temperature fluidity. The ISO 150 to 1000 grades are NSF H1 registered lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact.
Features and Benefits:
The Mobil Glygoyle Series of fully synthetic oils is specifically designed to outperform mineral and PAO synthetic lubricants in gear and hydrocarbon gas compression applications. In worm gears, the unique properties of these oils allows for more torque to be put through the reducer while in many cases lowering the operating oil sump temperature correlating to longer seal, oil, and gearbox life. In gas compressors, the limited solubility of hydrocarbons in the Mobil Glygoyle Series allows for reduced lubricant dilution and enhanced equipment protection.
Features compared to other mineral, synthetic, and PAG lubricants:
General: There are various types of PAG base oils. The inherent properties of these oils can differ depending on the raw materials and processes used in their manufacture. Features that can differ among various PAG oils include their traction coefficient (energy efficiency), thermal conductivity, and solubility with hydrocarbon oils, tendency to attract water, and low-temperature properties.
High Efficiency: ExxonMobil researchers have selected PAG base oils which provide high levels of energy efficiency relative to mineral, PAOs, and other PAG oils. This, coupled with an increased thermal conductivity of about 10% over mineral and PAO oils, leads to lower operating temperatures and longer component life.
Wide Temperatures: The Mobil Glygoyle Series has very high VIs ranging from 170 for the ISO 68 to 285 for the ISO 1000. This leads to a wide operating temperature range, beyond that of mineral and PAO lubricants.
Rust Protection: PAG lubricants, which are designed to be immiscible with hydrocarbon oils, tend to absorb water more than mineral or PAO oils. Because of the potential for high water-in-oil levels, care must be taken to prevent the formation of rust on equipment. Mobil Glygoyle Series oils pass major rust tests such as the ASTM D665A and Bethlehem Steel rust test parts A/B, and receives 0,0 ratings in the DIN 51802 Emcor rust test with distilled water. In addition, they show good yellow metal compatibility with a 1B rating in the ASTM D130 test. Mobil Glygoyle Series is not recommended for use in areas where saltwater contamination is expected.
Foam-Control: Foam control is important, especially in boxes that are "Sealed for Life". Mobil Glygoyle Series provides excellent results in all three sequences of ASTM D 892 Foam Test.
Additional Information:
Product Details:
Brand | Mobil |
CST | 85, 11.5 @ 40 Deg C, @ 100 Deg C |
Pour Point | -45, ASTM D 97, Deg C |
Flash Point | 226, ASTM D 92 Deg C |
Specific Gravity | 1.009, 20 Deg C, ASTM D 1298 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, ASTM D 665 distilled water |
Foam Tendency | 5/0, Stability, ASTM D 892, ml Sequence 1 |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test | 12+, ISO Fail Load Stage |
The Mobil Glygoyle brand of lubricants is recognized and appreciated around the world for its innovation and outstanding performance. The molecular designed polyalkyleneglycol synthetic products have been specially chosen for use in Mobil Glygoyle 11, 22, and 30 and demonstrate the continuing commitment to using advanced technology to provide outstanding product performance. A key factor in the development of Mobil Glygoyle 11, 22, and 30 were the close contacts between our scientists and application specialists with key OEMs to ensure that our product offerings will provide exceptional performance in the continually evolving industrial equipment designs.
Mobil Glygoyle products were primarily designed to meet the critical high-temperature needs of a variety of industrial equipment where mineral-based and other synthetic products were not able to perform satisfactorily. Additional features such as low friction and traction, gas absorption properties resulted in even broader industrial application opportunities. Mobil Glygoyle 11, 22, and 30 lubricants offer the following features and potential benefits:Features | Advantages and Potential Benefits |
Superb thermal and oxidative stability, and resistance to sludge and deposit formation | Extended lubricant life, increased production, less scheduled and unscheduled downtime. |
Lower maintenance costs and replacement expenditures | |
Low coefficients of traction and friction | Reduced operating temperatures, greater equipment efficiency, and potential for reduced power consumption and long seal life. |
Minimises effects of micro slip in rolling contact bearings for longer element life potential | |
Very high thermal conductivity | Helps to lower operating temperature, increasing charge life. |
Excellent low-temperature fluidity | Enables quicker warm-up at low ambient temperature resulting in reduced power consumption and smoother running. |
Reduced gear tooth wear at high temperatures for both steel-on-steel and steel-on-bronze metallurgies | Reduced operating costs due to less wear, reduced operating temperature and smoother running |
Reduced absorption and viscosity reduction with pressurised hydrocarbon gases | Improved film protection and long life for natural gas compressors |
Multipurpose industrial equipment capability | Potential to use fewer products with reduced inventory costs and less chance for mis-lubrication |
Product Details:
Brand | Mobil |
Packing | Drum |
Rust Protection | Pass, ASTM D 665 distilled water |
CST | 177, 25.1, @ 40 Deg C, @ 100 Deg C |
Pour Point | -41, ASTM D 97, Deg C |
Flash Point | 229, ASTM D 92 Deg C |
Specific Gravity | 1.007, 20 Deg C, ASTM D 1298 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Foam Tendency | 5/0, Stability, ASTM D 892, ml Sequence 1 |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test | 12+, ISO Fail Load Stage |
The Mobil Glygoyle brand of lubricants is recognized and appreciated around the world for its innovation and outstanding performance. The molecular designed synthetic products have been specially chosen for use in Mobil Glygoyle 11, 22, and 30 and demonstrate the continuing commitment to using advanced technology to provide outstanding product performance. A key factor in the development of Mobil Glygoyle 11, 22, and 30 were the close contacts between our scientists and application specialists with key OEMs to ensure that our product offerings will provide exceptional performance in the continually evolving industrial equipment designs.
Mobil Glygoyle products were primarily designed to meet the critical high-temperature needs of a variety of industrial equipment where mineral-based and other synthetic products were not able to perform satisfactorily. Additional features such as low friction and traction, gas absorption properties resulted in even broader industrial application opportunities. Mobil Glygoyle 11, 22, and 30 lubricants offer the following features and potential benefits:Features | Advantages and Potential Benefits |
Superb thermal and oxidative stability, and resistance to sludge and deposit formation | Extended lubricant life, increased production, less scheduled and unscheduled downtime. |
Lower maintenance costs and replacement expenditures | |
Low coefficients of traction and friction | Reduced operating temperatures, greater equipment efficiency, and potential for reduced power consumption and long seal life. |
Minimises effects of micro slip in rolling contact bearings for longer element life potential | |
Very high thermal conductivity | Helps to lower operating temperature, increasing charge life. |
Excellent low-temperature fluidity | Enables quicker warm-up at low ambient temperature resulting in reduced power consumption and smoother running. |
Reduced gear tooth wear at high temperatures for both steel-on-steel and steel-on-bronze metallurgies | Reduced operating costs due to less wear, reduced operating temperature and smoother running |
Reduced absorption and viscosity reduction with pressurised hydrocarbon gases | Improved film protection and long life for natural gas compressors |
Multipurpose industrial equipment capability | Potential to use fewer products with reduced inventory costs and less chance for mis-lubrication |
Product Details:
Brand | Mobil |
CST | 224, 30.9, @ 40 Deg C, @ 100 Deg C |
Pour Point | -45, ASTM D 97, DegC |
Flash Point | 221, ASTM D 92 Deg C |
Specific Gravity | 1.006, 20 Deg C, ASTM D 1298 |
Copper Strip Corrosion | 1B, ASTM D 130 100 DegC, 24 hours |
Rust Protection | Pass, ASTM D 665 distilled water |
Foam Tendency | 5/0, Stability, ASTM D 892, ml Sequence 1 |
Four Ball Wear | 0.4, ASTM D 4172, mm Wear Scar Diameter |
FZG Scuffing Test | 12+, ISO Fail Load Stage |
The Mobil Glygoyle brand of lubricants is recognized and appreciated around the world for its innovation and outstanding performance. The molecular designed polyalkyleneglycol synthetic products have been specially chosen for use in Mobil Glygoyle 11, 22, and 30 and demonstrate the continuing commitment to using advanced technology to provide outstanding product performance. A key factor in the development of Mobil Glygoyle 11, 22, and 30 were the close contacts between our scientists and application specialists with key OEMs to ensure that our product offerings will provide exceptional performance in the continually evolving industrial equipment designs.
Mobil Glygoyle products were primarily designed to meet the critical high-temperature needs of a variety of industrial equipment where mineral-based and other synthetic products were not able to perform satisfactorily. Additional features such as low friction and traction, gas absorption properties resulted in even broader industrial application opportunities. Mobil Glygoyle 11, 22, and 30 lubricants offer the following features and potential benefits:Features | Advantages and Potential Benefits |
Superb thermal and oxidative stability, and resistance to sludge and deposit formation | Extended lubricant life, increased production, less scheduled and unscheduled downtime. |
Lower maintenance costs and replacement expenditures | |
Low coefficients of traction and friction | Reduced operating temperatures, greater equipment efficiency, and potential for reduced power consumption and long seal life. |
Minimises effects of micro slip in rolling contact bearings for longer element life potential | |
Very high thermal conductivity | Helps to lower operating temperature, increasing charge life. |
Excellent low-temperature fluidity | Enables quicker warm-up at low ambient temperature resulting in reduced power consumption and smoother running. |
Reduced gear tooth wear at high temperatures for both steel-on-steel and steel-on-bronze metallurgies | Reduced operating costs due to less wear, reduced operating temperature and smoother running |
Reduced absorption and viscosity reduction with pressurised hydrocarbon gases | Improved film protection and long life for natural gas compressors |
Multipurpose industrial equipment capability | Potential to use fewer products with reduced inventory costs and less chance for mis-lubrication |